Main-circuit resistance testing detects poor joints, contacts and assembly errors. Results are meaningful only when current, test points, contact state and temperature are controlled. Learning objectives Select a suitable micro-ohm method, obtain repeatable values and investigate deviations without inventing a universal limit. Core engineering principles Four-wire measurement removes lead error Separate current and potential leads…
Continuity testing confirms that protective connections are present and have low resistance under the chosen method. It does not reproduce short-circuit current and cannot alone prove the rated thermal or mechanical withstand of the earth circuit. Learning objectives Define test points, method and acceptance and combine measured continuity with design and type-test evidence. Core engineering…
Visual and dimensional inspection finds errors that electrical tests can miss: wrong components, blocked pressure paths, inaccessible terminals, sharp edges, label mismatches and cable-space conflicts. Learning objectives Create an objective inspection checklist tied to approved drawings and product evidence. Core engineering principles Construction must match the qualified design Partitions, ducts, relief flaps and supports should…
Functional testing is unreliable when the design baseline is moving. A pre-FAT configuration review ensures that drawings, installed components, relay files and customer comments describe the same deliverable. Learning objectives Establish the test baseline, identify unresolved deviations and prevent results from being invalidated by late configuration changes. Core engineering principles The approved drawing revision controls…
An inspection and test plan (ITP) turns requirements into controlled evidence. It states what is tested, when, by whom, with which instrument, against what criterion and what record authorizes release. Learning objectives Build a traceable ITP, define hold/witness/review points and ensure prerequisites are complete before energising test circuits. Core engineering principles Every test needs a…
Switchgear tests answer different questions. Type tests qualify a design, routine tests verify every manufactured unit where required, and special tests are additional agreed investigations. FAT demonstrates contract compliance but does not redefine those categories. Learning objectives Classify each test correctly, request applicable evidence and prevent destructive design tests from being repeated as routine FAT…